Silicon Steel Cut To Length Line

Silicon Steel Cut To Length Line Process

Cut to Length Lines is processed in the following steps: decoil the raw material, feed with a fixed length via the servo motor, shearing it with various shearing tools into sheets of various types according to the drawing and then piling them on the stacking table via the conveying mechanism and the arranging mechanism.

Technical parameter

Type Parameter	HJ-400-5
Coil material width tolerance	±0.1mm
Shearing burr	≤0.02mm
S° deviation	Single direction ≤0.02mm/2000mm
Width of sheet	40-440mm
Length of sheet	350-2000mm (short side)
Thickness of sheet	0.23-0.35mm
Accuracy in Length	±0.2mm/2000mm
Shearing burr	≤0.02mm
Lifetime of blade	Approx. Over 1.2 million cuts
Accuracy of shearing angle	±0.025°
Max feeding speed	0-240m/min
Cutting time per time	≤0.023s (electrical)
Punching mold burr	≤0.02mm
Lifetime of punching die	Approx. 0.3-0.5 million punches
Layers of step-lap	1,2,3,4,5,6,7,8
Max stacking thickness	450mm (containing material board)
Human-machine interface	Touch screen soft keyboard
Size of whole machine (L*W*H)	18m×8m×2.2m
Installation capacity	25kw

Packing pictures

Contact us if you need more details on Cut to Length Lines. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Cut to Length Process、Cut to Length Line for Sale. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Cut To Length Line Machine