Motor & Lamination Core Used Non Oriented electrical Steel Silicon Steel Coil M470-50A

  Motor & Lamination Core Used Non Oriented electrical Steel Silicon Steel Coil M470-50A    Brief Introduction Non Oriented electrical Steel is steel with silicon added to it. The addition of silicon to steel increases its electrical resistance, improves the magnetic flux strength, and reduces the steel’s hysteresis loss. Hysteresis is the lag between the times when a magnetic field is first generated or applied to the steel and when the field fully develops. Through control of the grain size, the hysteresis loss of the steel can be accurately controlled.    Production Flow Chart   Specifications 1. Grades: 50W470
2. Thickness: 0.5mm&0.65mm
3. Width: 1200mm
4. Inner Diameter: 508mm
5. Weight of Steel Coil: 3-8MT   Parameters 1. Density: 7.70kg/dm3 2. Iron Loss: 4.034W/Kg (f=50Hz B=1.5T)
3. Magnetic Flux Strength: 1.645T (f=50Hz H=5000A/M)
4. Interlayer Resistance: >10Ω.cm2/piece 5. Yield Strength: 264MPa
6. Tensile Strength: 417MPa
7. Extended Length 35% (380MPa)
8. HV1 Hardness: 143
8. Lamination Factor: 97%
9. Minimum number of Bends: 10Times   Dimensional and Shape Tolerances

Width (mm)	Thickness (mm)	Thickness tolerance (mm)	Longitudinal thickness tolerance (mm)	Traverse thickness tolerance (mm)	Width Tolerance (mm)	Flatness (%)
800-100	0.35	±0.03	≤0.02	≤0.02	+1.5 0	≤2
	0.5	±0.03	≤0.03	≤0.02
	0.65	±0.04	≤0.03	≤0.03
>1000	0.35	±0.03	≤0.03	≤0.02	+1.5 0
	0.5	±0.03	≤0.03	≤0.02
	0.65	±0.04	≤0.04	≤0.03

  Vertical Packing   Horizontal Packing   Applications 1. Compressor Motor 2. General Motor
3. Small Precision Motor
4. Small Power Transformer
5. Welding Transformer
6. Voltage Regulator 7. Small relays 8. Generators 9. Generators for steam turbine and water wheels 10. Power distribution   Certificates   Quality Control & Test Instruments   Production Line   Factory Stockhouse    Factory Overlook   Superiority 1. Low iron loss, high magnetic flux strength, comes up to the international advance standard.
2. Slight thickness difference between the horizontal and the longitudinal directions, promising the high lamination factor.
3. Insulating coating: uniform color, good insulation, strong adhesivity, high heat resistance, high imputrescibility.
4. High accuracy dimension and excellent mechanical property are convenient for the users to slit, cut and laminate.
5. Smooth surface, no rust, no rolling marks, no cold lap, no crease, no bubble cell, no delamination defects.
6. Has been SGS approved, in accordance with various domestic and international environmental regulations.

Contact us if you need more details on Non Oriented Electrical Steel. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Non Grain Oriented Silicon Steel Coil、Silicon Steel Coil M470-50a. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Silicon Steel > Electrical Silicon Steel