Magnetic Steel Sheet W600 High Magnetic Induction Cold Rolled Non Grain Oriented Electric Steel Coil

  Magnetic Steel Sheet W600 High Magnetic Induction Cold Rolled Non Grain Oriented Electric Steel Coil   Brief Introduction Cold Rolled Non Grain Oriented Electric Steel Coil is steel with silicon added to it. The addition of silicon to steel increases its electrical resistance, improves the magnetic flux strength, and reduces the steel’s hysteresis loss. Hysteresis is the lag between the times when a magnetic field is first generated or applied to the steel and when the field fully develops. Through control of the grain size, the hysteresis loss of the steel can beaccurately controlled.
    Production Flow Chart     Specifications 1. Grades: 50W600
2. Thickness: 0.5mm&0.65mm
3. Width: 1200mm
4. Inner Diameter: 508mm
5. Weight of Steel Coil: 3-8MT     Parameters 1. Density: 7.75kg/dm3
2. Iron Loss: 4.409W/Kg (f=50Hz B=1.5T)
3. Magnetic Flux Strength: 1.674T (f=50Hz H=5000A/M)
4. Interlayer Resistance: >10Ω.cm2/piece 5. Yield Strength: 237MPa
6. Tensile Strength: 385MPa
7. Extended Length 38% (380MPa)
8. HV1 Hardness: 127
8. Lamination Factor: 97%
9. Minimum number of Bends: 10Times     Dimensional and Shape Tolerances

Width (mm)	Thickness (mm)	Thickness tolerance (mm)	Longitudinal thickness tolerance (mm)	Traverse thickness tolerance (mm)	Width Tolerance (mm)	Flatness (%)
800-100	0.35	±0.03	≤0.02	≤0.02	+1.5 0	≤2
	0.5	±0.03	≤0.03	≤0.02
	0.65	±0.04	≤0.03	≤0.03
>1000	0.35	±0.03	≤0.03	≤0.02	+1.5 0
	0.5	±0.03	≤0.03	≤0.02
	0.65	±0.04	≤0.04	≤0.03

    Packing       Applications 1. Compressor Motor 2. General Motor
3. Small Precision Motor
4. Small Power Transformer
5. Welding Transformer
6. Voltage Regulator 7. Small relays 8. Generators 9. Power distribution 10. Generators for steam turbine and water wheels     Certificates     Quality Control & Test Instruments     Production Line     Factory Warehouse     Factory Overlook     Superiority 1. Low iron loss, high magnetic flux strength, comes up to the international advance standard.
2. Slight thickness difference between the horizontal and the longitudinal directions, promising the high lamination factor.
3. Insulating coating: uniform color, good insulation, strong adhesivity, high heat resistance, high imputrescibility.
4. High accuracy dimension and excellent mechanical property are convenient for the users to slit, cut and laminate.
5. Smooth surface, no rust, no rolling marks, no cold lap, no crease, no bubble cell, no delamination defects.
6. Has been SGS approved, in accordance with various domestic and international environmental regulations.

Contact us if you need more details on Cold Rolled Non Grain Oriented Electric Steel Coil. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Astm Jis Standard Silicon Steel、Cold Rolled Non Grain Oriented Electric Steel Coil. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Silicon Steel > Cold Rolled Silicon Steel