General Motor Applied Grade W800 CRNGO Silicon Steel
Basic Info
Model No.: 50W800
Product Description
General Motor Applied Grade W800 Crngo Silicon Steel Brief Introduction CRNGO Silicon Steel is steel with silicon added to it. The addition of silicon to steel increases its electrical resistance, improves the magnetic flux strength, and reduces the steel’s hysteresis loss. Hysteresis is the lag between the times when a magnetic field is first generated or applied to the steel and when the field fully develops. Through control of the grain size, the hysteresis loss of the steel can be accurately controlled. Production Flow Chart Specifications 1. Grades: 50W800
2. Thickness: 0.5mm&0.65mm
3. Width: 1000mm&1200mm
4. Inner Diameter: 508mm
5. Weight of Steel Coil: 3-8MT Parameters 1. Density: 7.8kg/dm3
2. Iron Loss: 4.507W/Kg (f=50Hz B=1.5T)
3. Magnetic Flux Strength: 1.703T (f=50Hz H=5000A/M)
4. Interlayer Resistance: >10Ω.cm2/piece 5. Yield Strength: 250MPa
6. Tensile Strength: 360MPa
7. Extended Length 39% (380MPa)
8. HV1 Hardness: 122
8. Lamination Factor: 97%
9. Minimum number of Bends: 10Times Dimensional and Shape Tolerances
Vertical Packing Horizontal Packing Applications 1. Compressor Motor 2. General Motor
3. Small Precision Motor
4. Small Power Transformer
5. Welding Transformer
6. Voltage Regulator Certificates Quality Control & Test Instruments Production Line Factory Stockhouse Factory Overlook Superiority 1. Low iron loss, high magnetic flux strength, comes up to the international advance standard.
2. Slight thickness difference between the horizontal and the longitudinal directions, promising the high lamination factor.
3. Insulating coating: uniform color, good insulation, strong adhesivity, high heat resistance, high imputrescibility.
4. High accuracy dimension and excellent mechanical property are convenient for the users to slit, cut and laminate.
5. Smooth surface, no rust, no rolling marks, no cold lap, no crease, no bubble cell, no delamination defects.
6. Has been SGS approved, in accordance with various domestic and international environmental regulations. Contact us if you need more details on Crngo Silicon Steel. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Cold Rolled Non Oriented Silicon Steel、Silicon Steel Coil. If these products fail to match your need, please contact us and we would like to provide relevant information.
2. Thickness: 0.5mm&0.65mm
3. Width: 1000mm&1200mm
4. Inner Diameter: 508mm
5. Weight of Steel Coil: 3-8MT Parameters 1. Density: 7.8kg/dm3
2. Iron Loss: 4.507W/Kg (f=50Hz B=1.5T)
3. Magnetic Flux Strength: 1.703T (f=50Hz H=5000A/M)
4. Interlayer Resistance: >10Ω.cm2/piece 5. Yield Strength: 250MPa
6. Tensile Strength: 360MPa
7. Extended Length 39% (380MPa)
8. HV1 Hardness: 122
8. Lamination Factor: 97%
9. Minimum number of Bends: 10Times Dimensional and Shape Tolerances
Width (mm) | Thickness (mm) | Thickness tolerance (mm) | Longitudinal thickness tolerance (mm) | Traverse thickness tolerance (mm) | Width Tolerance (mm) | Flatness (%) |
800-100 | 0.35 | ±0.03 | ≤0.02 | ≤0.02 | +1.5 0 | ≤2 |
0.5 | ±0.03 | ≤0.03 | ≤0.02 | |||
0.65 | ±0.04 | ≤0.03 | ≤0.03 | |||
>1000 | 0.35 | ±0.03 | ≤0.03 | ≤0.02 | +1.5 0 | |
0.5 | ±0.03 | ≤0.03 | ≤0.02 | |||
0.65 | ±0.04 | ≤0.04 | ≤0.03 |
3. Small Precision Motor
4. Small Power Transformer
5. Welding Transformer
6. Voltage Regulator Certificates Quality Control & Test Instruments Production Line Factory Stockhouse Factory Overlook Superiority 1. Low iron loss, high magnetic flux strength, comes up to the international advance standard.
2. Slight thickness difference between the horizontal and the longitudinal directions, promising the high lamination factor.
3. Insulating coating: uniform color, good insulation, strong adhesivity, high heat resistance, high imputrescibility.
4. High accuracy dimension and excellent mechanical property are convenient for the users to slit, cut and laminate.
5. Smooth surface, no rust, no rolling marks, no cold lap, no crease, no bubble cell, no delamination defects.
6. Has been SGS approved, in accordance with various domestic and international environmental regulations. Contact us if you need more details on Crngo Silicon Steel. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Cold Rolled Non Oriented Silicon Steel、Silicon Steel Coil. If these products fail to match your need, please contact us and we would like to provide relevant information.
Product Categories : Silicon Steel > CRNGO Silicon Steel
Premium Related Products
Other Products
Hot Products
Prime AZ 150 Galvalume Steel Coil Aluzinc Sheet with AfpColor Coated Steel Prepainted PPGI PPGL Steel SheetHigh Adhesiveness Aerosol Spray Can Used Electrolytic TinplateHigh Cost Effective Prime Tinplate Sheet for Metal Gift TinFood Cans Used Tinplate 2.8/2.8 0.3mm ThicknessPrime Anti-Corrosion Tinplate Coil for Metal Packaging 0.18mm ThicknessHighly Decorative Galvalume SheetHigh Corrosion Resistance HDGLOutside Wall Used Painted Steel CoilGeneral Motor Applied Cold Rolled Silicon SteelHigh Efficiency CRNGO Electrical Steel CoilsHigh Reflectivity Galvanized SheetHigh Quality Surface Finish Cold Rolled SteelGood Thermal Resistance Galvalume Steel CoilExcellent Mechanical Property Prepainted Galvanized Steel CoilHigh Electric Resistance Silicon Steel Lamination