Compressor Motor Applied Grade 50W600 Silicon Electrical Steel Sheet
Basic Info
Model No.: 50W600
Product Description
2. Thickness: 0.5mm&0.65mm
3. Width: 1000mm&1200mm
4. Inner Diameter: 508mm
5. Weight of Steel Coil: 3-8MT Parameters 1. Density: 7.75kg/dm3
2. Iron Loss: 4.409W/Kg (f=50Hz B=1.5T)
3. Magnetic Flux Strength: 1.674T (f=50Hz H=5000A/M)
4. Interlayer Resistance: >10Ω.cm2/piece 5. Yield Strength: 237MPa
6. Tensile Strength: 384MPa
7. Extended Length 38% (380MPa)
8. HV1 Hardness: 127
8. Lamination Factor: 97%
9. Minimum number of Bends: 10Times Dimensional and Shape Tolerances
Width (mm) | Thickness (mm) | Thickness tolerance (mm) | Longitudinal thickness tolerance (mm) | Traverse thickness tolerance (mm) | Width Tolerance (mm) | Flatness (%) |
800-100 | 0.35 | ±0.03 | ≤0.02 | ≤0.02 | +1.5 0 | ≤2 |
0.5 | ±0.03 | ≤0.03 | ≤0.02 | |||
0.65 | ±0.04 | ≤0.03 | ≤0.03 | |||
>1000 | 0.35 | ±0.03 | ≤0.03 | ≤0.02 | +1.5 0 | |
0.5 | ±0.03 | ≤0.03 | ≤0.02 | |||
0.65 | ±0.04 | ≤0.04 | ≤0.03 |
2. Slight thickness difference between the horizontal and the longitudinal directions, promising the high lamination factor.
3. Insulating coating: uniform color, good insulation, strong adhesivity, high heat resistance, high imputrescibility.
4. High accuracy dimension and excellent mechanical property are convenient for the users to slit, cut and laminate.
5. Smooth surface, no rust, no rolling marks, no cold lap, no crease, no bubble cell, no delamination defects.
6. Has been SGS approved, in accordance with various domestic and international environmental regulations. Contact us if you need more details on Silicon Electrical Steel Sheet. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Silicon Steel Sheet、Electrical Steel Sheet. If these products fail to match your need, please contact us and we would like to provide relevant information.
Product Categories : Silicon Steel > Electrical Silicon Steel
Premium Related Products