SGS Approved Cold Rolled Steel Strip

Specifications Cold Rolled Steel Strip

1.High Quality Surface Finish

2.High Dimensional Precision

3.Excellent mechanical property

  Cold Rolled Steel Strip   Brief Introduction Cold Rolled Steel Strip is steel that has been worked below its recrystallization temperature by passing it between a pair of rollers. Recrystallization temperature is the temperature at which grains in the lattice structure of the metal have been rearranged, leaving it free of strain and deformations. Cold Rolled Steel Strip is pre-treated before being cold rolled with a process known as pickling, which uses strong acids to remove scale and other impurities. The Cold Rolled Steel Strip is then passed through rollers to reduce its thickness. Most cold rolling takes place in multiple passes and as the size of the Cold Rolled Steel Strip is further reduced, its strength and hardness both increase, but its ductility decreases. After cold rolling, heating the metal up in a process known as annealing can restore some of its ductility.    Production Flow Chart   Specification 1. Thickness: 0.4-2.0mm 2. Width: 900-1250mm 3. Inner Diameter: 508 & 610mm 4. Weight of Steel Coil: 3-15MT 5. Heat Treatment: Annealed + Smoothed 6. Margin Status: EC & EM 7. Surface Quality: FC & FD 8. Surface Treatment: Oiling 9. Surface Status: Bright   Chemical Components

Grade	Chemical Components
	C	Mn	P	S	Alt
SPCC	≤0.12	≤0.50	≤0.035	≤0.025	≥0.020
SPCD	≤0.10	≤0.45	≤0.030	≤0.025	≥0.020
SPCE	≤0.08	≤0.40	≤0.025	≤0.020	≥0.020

  Mechanical Properties 1. Yield Strength: ≤320MPa 2. Tensile Strength: ≤370MPa 3. Elongation (L=50mm, b=25mm) When: (1) Nominal Thickness <0.25mm: 30% (2) Nominal Thickness 0.25mm-<0.40: 32% (3) Nominal Thickness 0.40-<0.60mm: 34% (4) Nominal Thickness 0.60-<1.0mm: 36% (5) Nominal Thickness 1.0-<1.6mm: 37% (6) Nominal Thickness >1.6mm: 38%   Packing   Application 1. Base metal for coated and dipped products. 2. Home appliance and home furniture 3. Bicycle 4. Building industry 5. Battery Shell 6. Automobile fitting, hardware 7. Industrial products including motors, generators   Certificates   Quality Control & Test Instruments   Production Line   Factory Overlook   Superiority 1. High precision of dimensional tolerance 2. Excellent mechanical property such as the yield strength and tensile strength, etc. 3. Being highly resistant to denting 4. Exhibits useful magnetic properties 5. High quality surface finish and get well prepared for the surface coating 6. Available in a variety of sizes and shapes with characteristics useful in a wide range of applications  

Contact us if you need more details on Cold Rolled Steel Strip. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Cold Rolled Steel Coils、Cold Rolled Steel Sheets. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Cold Rolled Steel Coil